Gaskets and Seals:All parts for 1972 CHEVROLETC20 PICKUP
|
| Part # | Engine / Misc Description | Part Description | Click to Check Price |
| 99176 | L6-292 (4.8L) | BCA Part # 99176 ; Redi-Sleeve {Redi-Sleeve (1.761x1.767x.563)}  | |
| 5092 | L6-292 (4.8L) | BCA Part # 5092 ; (Split Seal) {Silicone Lip Material Outer Diameter = 3.03 Width = 0.325}  | |
| 8006PT | L6-292 (4.8L) | FEL-PRO Part # 8006PT ; {Head Gasket}  | |
| HS8006PT-1 | L6-292 (4.8L) | FEL-PRO Part # HS8006PT1 ; {Head Gasket Set HEAD (HS) SETS are used for upper engine repair only, typically on a valve grind.}  | |
| BS11829-1 | L6-292 (4.8L) | FEL-PRO Part # BS118291 ; Rubber; Two-piece; Offset single lip {Rear Main Seal Set}  | |
| BS40013 | L6-292 (4.8L) | FEL-PRO Part # BS40013 ; Rubber; Two-piece; Double lip {Rear Main Seal Set}  | |
| BS40655 | L6-292 (4.8L) | FEL-PRO Part # BS40655 ; Rubber; Two-piece; Single lip {Rear Main Seal Set}  | |
| 5000 | L6-292 (4.8L) | BCA Part # 5000 ; {Harmonic Balancer Kit}  | |
| 88176 | L6-292 (4.8L) | BCA Part # 88176 ; {Harmonic Balancer Sleeve (1.761x1.767x.563)}  | |
| CS8006-2 | L6-292 (4.8L) | FEL-PRO Part # CS80062 ; {Conversion Gasket Set - Gasket set for the lower half of the engine block. Typically includes oil pan gasket, front and re  | |
| 9845 | L6-292 (4.8L) | BCA Part # 9845 ; {Oil Seal Fluoroelastomers Shaft Size=1.763 Housing Bore=2.409 Outer Diameter=2.416 Width=0.375}  | |
| VS13173-1 | L6-292 (4.8L) | FEL-PRO Part # VS131731 ; Cork {Valve Cover Gasket Set}  | |
| VS13173R-1 | L6-292 (4.8L) | FEL-PRO Part # VS13173R1 ; Rubber {Valve Cover Gasket Set}  | |
| SS5112 | L6-292 (4.8L) | FEL-PRO Part # SS5112 ; O-Ring {Valve Stem Seal Set}  | |
| TCS13198 | L6-292 (4.8L) | FEL-PRO Part # TCS13198 ; w/o Sleeve 'N' Seal« {Timing Cover Gasket Set}  | |
| TCS45264 | L6-292 (4.8L) | FEL-PRO Part # TCS45264 ; w/Sleeve 'N' Seal« {Gasket Set w/Seal & Sleeve}  | |
| FS8006PT-4 | L6-292 (4.8L) | FEL-PRO Part # FS8006PT4 ; {Full Gasket Set - FULL (FS) SETS are for upper and lower engine work combined, usually a complete overhaul.}  | |
| HS7733SH-2 | V8-350 (5.7L) | FEL-PRO Part # HS7733SH2 ; Embossed steel shim; 2 17/32'' ID exh. pipe packing not incl.; Head bolts not incl. {Head Gasket Set HEAD (HS) SETS are u  | |
| 7733SP | V8-350 (5.7L) | FEL-PRO Part # 7733SP ; HeadSaver«; 2 Req'd. {Head Gasket Spacer Shim}  | |
| TCS45165 | V8-350 (5.7L) | FEL-PRO Part # TCS45165 ; w/Sleeve 'N' Seal« {Gasket Set w/Seal & Sleeve}  | |
| 8651PT | V8-350 (5.7L) | FEL-PRO Part # 8651PT ; H/D eng.; 2 Req'd.; Head bolts not incl. {Head Gasket}  | |
| 5000 | V8-350 (5.7L) | BCA Part # 5000 ; {Harmonic Balancer Kit} | |
| MS90314-2 | V8-350 (5.7L) | FEL-PRO Part # MS903142 ; w/2 Bbl. & w/4 Bbl. {Int. Manifold Gasket Set}  | |
| VS12869AC | V8-350 (5.7L) | FEL-PRO Part # VS12869AC ; Cork; 7/32'' thick {Valve Cover Gasket Set}  | |
| HS7733PT-2 | V8-350 (5.7L) | FEL-PRO Part # HS7733PT2 ; PermaTorque«; 2 17/32'' ID exh. pipe packing not incl.; Head bolts not incl. {Head Gasket Set HEAD (HS) SETS are used for  | |
| 99176 | V8-350 (5.7L) | BCA Part # 99176 ; Redi-Sleeve {Redi-Sleeve (1.761x1.767x.563)} | |
| 9845 | V8-350 (5.7L) | BCA Part # 9845 ; {Oil Seal Fluoroelastomers Shaft Size=1.763 Housing Bore=2.409 Outer Diameter=2.416 Width=0.375} | |
| 88176 | V8-350 (5.7L) | BCA Part # 88176 ; {Harmonic Balancer Sleeve (1.761x1.767x.563)} | |
| TCS5124-1 | V8-350 (5.7L) | FEL-PRO Part # TCS51241 ; w/o Sleeve 'N' Seal« {Timing Cover Gasket Set}  | |
| MS9275B | V8-350 (5.7L) | FEL-PRO Part # MS9275B ; w/2 Bbl. & w/4 Bbl. {Exh. Manifold Gasket Set}  | |
| FS7733SH-2 | V8-350 (5.7L) | FEL-PRO Part # FS7733SH2 ; Embossed steel shim; 2 17/32'' ID exh. pipe packing not incl.; Head bolts not incl. {Full Gasket Set - FULL (FS) SETS are  | |
| FS7733PT-2 | V8-350 (5.7L) | FEL-PRO Part # FS7733PT2 ; PermaTorque«; 2 17/32'' ID exh. pipe packing not incl.; Head bolts not incl. {Full Gasket Set - FULL (FS) SETS are for up  | |
| CS7733-2 | V8-350 (5.7L) | FEL-PRO Part # CS77332 ; {Conversion Gasket Set - Gasket set for the lower half of the engine block. Typically includes oil pan gasket, front and re  | |
| BS11829-1 | V8-350 (5.7L) | FEL-PRO Part # BS118291 ; Rubber; Two-piece; Offset single lip {Rear Main Seal Set} | |
| SS5112 | V8-350 (5.7L) | FEL-PRO Part # SS5112 ; Loc. Int. & Exh.; O-ring {Valve Stem Seal Set} | |
| SS10058 | V8-350 (5.7L) | FEL-PRO Part # SS10058 ; Opt. Umbrella Seal for use w/O-Ring Seal {Valve Stem Seal Set}  | |
| BS40013 | V8-350 (5.7L) | FEL-PRO Part # BS40013 ; Rubber; Two-piece; Double lip {Rear Main Seal Set} | |
| VS12869 | V8-350 (5.7L) | FEL-PRO Part # VS12869 ; Cork; 5/32'' Thick {Valve Cover Gasket Set}  | |
| BS40655 | V8-350 (5.7L) | FEL-PRO Part # BS40655 ; Rubber; Two-piece; Single lip {Rear Main Seal Set} | |
| 501SD | V8-350 (5.7L) | FEL-PRO Part # 501SD ; PermaTorque Severe DutyÖ; 2 Req'd.; Head bolts not incl. {Cylinder Head Gasket}  | |
| 7733PT-2 | V8-350 (5.7L) | FEL-PRO Part # 7733PT2 ; PermaTorque«; 2 Req'd.; Head bolts not incl. {Head Gasket}  | |
| 7733SH-1 | V8-350 (5.7L) | FEL-PRO Part # 7733SH1 ; Embossed steel shim; 2 Req'd.; Head bolts not incl. {Head Gasket}  | |
| VS50265C | V8-350 (5.7L) | FEL-PRO Part # VS50265C ; Hi-Temp. {Valve Cover Gasket Set}  | |
| VS12869T | V8-350 (5.7L) | FEL-PRO Part # VS12869T ; PermaDryPlus« {Valve Cover Gasket Set}  | |
| VS12869R | V8-350 (5.7L) | FEL-PRO Part # VS12869R ; Rubber {Valve Cover Gasket Set}  | |
| 5092 | V8-350 (5.7L) | BCA Part # 5092 ; (Split Seal) {Silicone Lip Material Outer Diameter = 3.03 Width = 0.325} | |
| 7733PT-2 | V8-307 (5.0L) | FEL-PRO Part # 7733PT2 ; PermaTorque«; 2 Req'd.; Head bolts not incl. {Head Gasket} | |
| MS90314-2 | V8-307 (5.0L) | FEL-PRO Part # MS903142 ; {Int. Manifold Gasket Set} | |
| MS9275B | V8-307 (5.0L) | FEL-PRO Part # MS9275B ; {Exh. Manifold Gasket Set} | |
| 7733SP | V8-307 (5.0L) | FEL-PRO Part # 7733SP ; HeadSaver«; 2 Req'd. {Head Gasket Spacer Shim} | |
| HS7733SH-2 | V8-307 (5.0L) | FEL-PRO Part # HS7733SH2 ; Embossed steel shim; 2 17/32'' ID exh. pipe packing not incl.; Head bolts not incl. {Head Gasket Set HEAD (HS) SETS are u | |
| HS7733PT-2 | V8-307 (5.0L) | FEL-PRO Part # HS7733PT2 ; PermaTorque«; 2 17/32'' ID exh. pipe packing not incl.; Head bolts not incl. {Head Gasket Set HEAD (HS) SETS are used for | |
| 7733SH-1 | V8-307 (5.0L) | FEL-PRO Part # 7733SH1 ; Embossed steel shim; 2 Req'd.; Head bolts not incl. {Head Gasket} | |
| BS40655 | V8-307 (5.0L) | FEL-PRO Part # BS40655 ; Rubber; Two-piece; Single lip {Rear Main Seal Set} | |
| 501SD | V8-307 (5.0L) | FEL-PRO Part # 501SD ; PermaTorque Severe DutyÖ; 2 Req'd.; Head bolts not incl. {Cylinder Head Gasket} | |
| FS7733PT-2 | V8-307 (5.0L) | FEL-PRO Part # FS7733PT2 ; PermaTorque«; 2 17/32'' ID exh. pipe packing not incl.; Head bolts not incl. {Full Gasket Set - FULL (FS) SETS are for up | |
| 5092 | V8-307 (5.0L) | BCA Part # 5092 ; (Split Seal) {Silicone Lip Material Outer Diameter = 3.03 Width = 0.325} | |
| FS7733SH-2 | V8-307 (5.0L) | FEL-PRO Part # FS7733SH2 ; Embossed steel shim; 2 17/32'' ID exh. pipe packing not incl.; Head bolts not incl. {Full Gasket Set - FULL (FS) SETS are | |
| CS7733-2 | V8-307 (5.0L) | FEL-PRO Part # CS77332 ; {Conversion Gasket Set - Gasket set for the lower half of the engine block. Typically includes oil pan gasket, front and re | |
| 8651PT | V8-307 (5.0L) | FEL-PRO Part # 8651PT ; H/D eng.; 2 Req'd.; Head bolts not incl. {Head Gasket} | |
| TCS45165 | V8-307 (5.0L) | FEL-PRO Part # TCS45165 ; w/Sleeve 'N' Seal« {Gasket Set w/Seal & Sleeve} | |
| VS12869AC | V8-307 (5.0L) | FEL-PRO Part # VS12869AC ; Cork; 7/32'' thick {Valve Cover Gasket Set} | |
| VS12869R | V8-307 (5.0L) | FEL-PRO Part # VS12869R ; Rubber {Valve Cover Gasket Set} | |
| VS12869T | V8-307 (5.0L) | FEL-PRO Part # VS12869T ; PermaDryPlus« {Valve Cover Gasket Set} | |
| 9845 | V8-307 (5.0L) | BCA Part # 9845 ; {Oil Seal Fluoroelastomers Shaft Size=1.763 Housing Bore=2.409 Outer Diameter=2.416 Width=0.375} | |
| 88176 | V8-307 (5.0L) | BCA Part # 88176 ; {Harmonic Balancer Sleeve (1.761x1.767x.563)} | |
| 5000 | V8-307 (5.0L) | BCA Part # 5000 ; {Harmonic Balancer Kit} | |
| VS12869 | V8-307 (5.0L) | FEL-PRO Part # VS12869 ; Cork; 5/32'' Thick {Valve Cover Gasket Set} | |
| VS50265C | V8-307 (5.0L) | FEL-PRO Part # VS50265C ; Hi-Temp. {Valve Cover Gasket Set} | |
| 99176 | V8-307 (5.0L) | BCA Part # 99176 ; Redi-Sleeve {Redi-Sleeve (1.761x1.767x.563)} | |
| TCS5124-1 | V8-307 (5.0L) | FEL-PRO Part # TCS51241 ; w/o Sleeve 'N' Seal« {Timing Cover Gasket Set} | |
| SS10058 | V8-307 (5.0L) | FEL-PRO Part # SS10058 ; Opt. Umbrella Seal for use w/O-Ring Seal {Valve Stem Seal Set} | |
| SS5112 | V8-307 (5.0L) | FEL-PRO Part # SS5112 ; O-Ring {Valve Stem Seal Set} | |
| BS40013 | V8-307 (5.0L) | FEL-PRO Part # BS40013 ; Rubber; Two-piece; Double lip {Rear Main Seal Set} | |
| BS11829-1 | V8-307 (5.0L) | FEL-PRO Part # BS118291 ; Rubber; Two-piece; Offset single lip {Rear Main Seal Set} | |
| VS13173R-1 | L6-250 (4.1L) | FEL-PRO Part # VS13173R1 ; w/Separate head & int. manifold; 3 bolt holes on R.H. of valve cover; Rubber {Valve Cover Gasket Set} | |
| CS8006-2 | L6-250 (4.1L) | FEL-PRO Part # CS80062 ; 24 Bolt Oil Pan {Conversion Gasket Set - Gasket set for the lower half of the engine block. Typically includes oil pan gask | |
| 5092 | L6-250 (4.1L) | BCA Part # 5092 ; (Split Seal) {Silicone Lip Material Outer Diameter = 3.03 Width = 0.325} | |
| VS13173-1 | L6-250 (4.1L) | FEL-PRO Part # VS131731 ; w/Separate head & int. manifold; 3 bolt holes on R.H. of valve cover; Cork {Valve Cover Gasket Set} | |
| 99176 | L6-250 (4.1L) | BCA Part # 99176 ; Redi-Sleeve {Redi-Sleeve (1.761x1.767x.563)} | |
| 9845 | L6-250 (4.1L) | BCA Part # 9845 ; {Oil Seal Fluoroelastomers Shaft Size=1.763 Housing Bore=2.409 Outer Diameter=2.416 Width=0.375} | |
| BS11829-1 | L6-250 (4.1L) | FEL-PRO Part # BS118291 ; Rubber; Two-piece; Offset single lip {Rear Main Seal Set} | |
| 5000 | L6-250 (4.1L) | BCA Part # 5000 ; {Harmonic Balancer Kit} | |
| TCS45264 | L6-250 (4.1L) | FEL-PRO Part # TCS45264 ; w/Sleeve 'N' Seal« {Gasket Set w/Seal & Sleeve} | |
| 8006PT | L6-250 (4.1L) | FEL-PRO Part # 8006PT ; w/Separate head & int. manifold {Head Gasket} | |
| FS8006PT-4 | L6-250 (4.1L) | FEL-PRO Part # FS8006PT4 ; w/Separate head & int. manifold {Full Gasket Set - FULL (FS) SETS are for upper and lower engine work combined, usually a | |
| HS8006PT-1 | L6-250 (4.1L) | FEL-PRO Part # HS8006PT1 ; w/Separate head & int. manifold {Head Gasket Set HEAD (HS) SETS are used for upper engine repair only, typically on a val | |
| TCS13198 | L6-250 (4.1L) | FEL-PRO Part # TCS13198 ; w/o Sleeve 'N' Seal« {Timing Cover Gasket Set} | |
| BS40655 | L6-250 (4.1L) | FEL-PRO Part # BS40655 ; Rubber; Two-piece; Single lip {Rear Main Seal Set} | |
| BS40013 | L6-250 (4.1L) | FEL-PRO Part # BS40013 ; Rubber; Two-piece; Double lip {Rear Main Seal Set} | |
| SS5112 | L6-250 (4.1L) | FEL-PRO Part # SS5112 ; O-Ring {Valve Stem Seal Set} | |
| 88176 | L6-250 (4.1L) | BCA Part # 88176 ; {Harmonic Balancer Sleeve (1.761x1.767x.563)} | |
