Gaskets and Seals:All parts for 1975 FORDF-150 PICKUP
|
| Part # | Engine / Misc Description | Part Description | Click to Check Price |
| BS40509 | L6-300 (4.9L) | FEL-PRO Part # BS40509 ; Rubber; One-piece {Rear Main Seal Set}  | |
| SS13807 | L6-300 (4.9L) | FEL-PRO Part # SS13807 ; Loc. Int. & Exh.; Premium valve stem seals incl. {Valve Stem Seal Set}  | |
| VS50033R | L6-300 (4.9L) | FEL-PRO Part # VS50033R ; Rubber {Valve Cover Gasket Set}  | |
| VS50033C-1 | L6-300 (4.9L) | FEL-PRO Part # VS50033C1 ; Cork {Valve Cover Gasket Set}  | |
| CS8168 | L6-300 (4.9L) | FEL-PRO Part # CS8168 ; {Conversion Gasket Set - Gasket set for the lower half of the engine block. Typically includes oil pan gasket, front and rea  | |
| TCS45044 | L6-300 (4.9L) | FEL-PRO Part # TCS45044 ; w/o Sleeve 'N' Seal« {Timing Cover Gasket Set}  | |
| TCS45278 | L6-300 (4.9L) | FEL-PRO Part # TCS45278 ; w/Sleeve 'N' Seal« {Gasket Set w/Seal & Sleeve}  | |
| 88187 | L6-300 (4.9L) | BCA Part # 88187 ; {Harmonic Balancer Sleeve (1.872x1.878x.563)}  | |
| 5001 | L6-300 (4.9L) | BCA Part # 5001 ; {Harmonic Balancer Kit}  | |
| 2942 | L6-300 (4.9L) | BCA Part # 2942 ; {Oil Seal Acrylates Shaft Size=1.875 Housing Bore=2.56 Outer Diameter=2.565 Width=0.406}  | |
| BS40645 | L6-300 (4.9L) | FEL-PRO Part # BS40645 ; PTFE Rubber; One-piece {Rear Main Seal Set}  | |
| 8168SP | L6-300 (4.9L) | FEL-PRO Part # 8168SP ; HeadSaver« {Head Gasket Spacer Shim}  | |
| FS8168PT-2 | L6-300 (4.9L) | FEL-PRO Part # FS8168PT2 ; Premium valve stem seals incl. {Full Gasket Set - FULL (FS) SETS are for upper and lower engine work combined, usually a  | |
| 2377 | L6-300 (4.9L) | BCA Part # 2377 ; {Oil Seal Fluoroelastomers Shaft Size=3.75 Housing Bore=4.501 Outer Diameter=4.506 Width=0.362}  | |
| 5278 | L6-300 (4.9L) | BCA Part # 5278 ; PTFE Rubber {P.T.F.E. Lip Material Shaft Size = 3.75 Outer Diameter = 4.506 Width = 0.362}  | |
| 99372 | L6-300 (4.9L) | BCA Part # 99372 ; Redi-Sleeve {Redi-Sleeve (3.750x3.756x.688)}  | |
| 8168PT | L6-300 (4.9L) | FEL-PRO Part # 8168PT ; {Head Gasket}  | |
| 525SD | L6-300 (4.9L) | FEL-PRO Part # 525SD ; PermaTorque Severe DutyÖ {Cylinder Head Gasket}  | |
| HS8168PT-3 | L6-300 (4.9L) | FEL-PRO Part # HS8168PT3 ; Premium valve stem seals incl. {Head Gasket Set HEAD (HS) SETS are used for upper engine repair only, typically on a valv  | |
| CS8548-4 | V8-302 (5.0L) | FEL-PRO Part # CS85484 ; Water pump to plate gskts. not incl. {Conversion Gasket Set - Gasket set for the lower half of the engine block. Typically  | |
| VS13264T | V8-302 (5.0L) | FEL-PRO Part # VS13264T ; PermaDryPlus« {Valve Cover Gasket Set}  | |
| VS13264R | V8-302 (5.0L) | FEL-PRO Part # VS13264R ; Rubber {Valve Cover Gasket Set}  | |
| VS13264C | V8-302 (5.0L) | FEL-PRO Part # VS13264C ; Cork {Valve Cover Gasket Set}  | |
| 88187 | V8-302 (5.0L) | BCA Part # 88187 ; {Harmonic Balancer Sleeve (1.872x1.878x.563)} | |
| 5095 | V8-302 (5.0L) | BCA Part # 5095 ; (Rope Type) {Nitrile Lip Material Shaft Size = 3.438 Outer Diameter = 4.012 Width = 0.41}  | |
| MS90103-1 | V8-302 (5.0L) | FEL-PRO Part # MS901031 ; {Int. Manifold Gasket Set}  | |
| 5108 | V8-302 (5.0L) | BCA Part # 5108 ; (Split Seal) {Nitrile Lip Material Outer Diameter = 4.2 Width = 0.222}  | |
| BS30136 | V8-302 (5.0L) | FEL-PRO Part # BS30136 ; Rubber; Two-piece {Rear Main Seal Set}  | |
| VS50029C | V8-302 (5.0L) | FEL-PRO Part # VS50029C ; Hi-Temp.; w/Compression stops {Valve Cover Gasket Set}  | |
| 8548PT-2 | V8-302 (5.0L) | FEL-PRO Part # 8548PT2 ; 2 Req'd.; Head bolts not incl. {Head Gasket}  | |
| 99187 | V8-302 (5.0L) | BCA Part # 99187 ; Redi-Sleeve {Redi-Sleeve (1.872x1.878x.563)}  | |
| MS90000 | V8-302 (5.0L) | FEL-PRO Part # MS90000 ; {Exh. Manifold Gasket Set}  | |
| 8548SP-1 | V8-302 (5.0L) | FEL-PRO Part # 8548SP1 ; HeadSaver«; 2 Req'd. {Head Gasket Spacer Shim}  | |
| 9333PT-1 | V8-302 (5.0L) | FEL-PRO Part # 9333PT1 ; H/D eng.; 2 Req'd.; Head bolts not incl. {Head Gasket}  | |
| HS8548PT-11 | V8-302 (5.0L) | FEL-PRO Part # HS8548PT11 ; Premium valve stem seals incl. {Head Gasket Set HEAD (HS) SETS are used for upper engine repair only, typically on a val  | |
| 2942 | V8-302 (5.0L) | BCA Part # 2942 ; {Oil Seal Acrylates Shaft Size=1.875 Housing Bore=2.56 Outer Diameter=2.565 Width=0.406} | |
| TCS45168 | V8-302 (5.0L) | FEL-PRO Part # TCS45168 ; w/Sleeve 'N' Seal«; Water pump to plate gskts. not incl. {Gasket Set w/Seal & Sleeve}  | |
| FS8548PT-16 | V8-302 (5.0L) | FEL-PRO Part # FS8548PT16 ; Water pump to plate gskts. not incl.; Premium valve stem seals incl. {Full Gasket Set - FULL (FS) SETS are for upper and  | |
| TCS45008 | V8-302 (5.0L) | FEL-PRO Part # TCS45008 ; w/o Sleeve 'N' Seal«; Water pump to plate gskts. not incl. {Timing Cover Gasket Set}  | |
| 5001 | V8-302 (5.0L) | BCA Part # 5001 ; {Harmonic Balancer Kit} | |
| SS72562 | V8-302 (5.0L) | FEL-PRO Part # SS72562 ; Loc. Exh.; Premium valve stem seals incl. {Valve Stem Seal Set}  | |
| SS13364-1 | V8-302 (5.0L) | FEL-PRO Part # SS133641 ; Loc. Int.; Premium valve stem seals incl. {Valve Stem Seal Set}  | |
| 5001 | V8-360 (5.9L) | BCA Part # 5001 ; {Harmonic Balancer Kit} | |
| MS95000 | V8-360 (5.9L) | FEL-PRO Part # MS95000 ; Heat shield {Exh. Manifold Gasket Set}  | |
| TCS45167 | V8-360 (5.9L) | FEL-PRO Part # TCS45167 ; w/Sleeve 'N' Seal« {Gasket Set w/Seal & Sleeve}  | |
| MS9812 | V8-360 (5.9L) | FEL-PRO Part # MS9812 ; Gskt. for use w/old heat shield {Exh. Manifold Gasket Set}  | |
| MS90145 | V8-360 (5.9L) | FEL-PRO Part # MS90145 ; {Int. Manifold Gasket Set}  | |
| 88187 | V8-360 (5.9L) | BCA Part # 88187 ; {Harmonic Balancer Sleeve (1.872x1.878x.563)} | |
| 8554SP | V8-360 (5.9L) | FEL-PRO Part # 8554SP ; HeadSaver«; 2 Req'd. {Head Gasket Spacer Shim}  | |
| 2942 | V8-360 (5.9L) | BCA Part # 2942 ; {Oil Seal Acrylates Shaft Size=1.875 Housing Bore=2.56 Outer Diameter=2.565 Width=0.406} | |
| BS30138 | V8-360 (5.9L) | FEL-PRO Part # BS30138 ; Rubber; Two-piece {Rear Main Seal Set}  | |
| TCS13075-1 | V8-360 (5.9L) | FEL-PRO Part # TCS130751 ; w/o Sleeve 'N' Seal« {Timing Cover Gasket Set}  | |
| 99187 | V8-360 (5.9L) | BCA Part # 99187 ; Redi-Sleeve {Redi-Sleeve (1.872x1.878x.563)} | |
| VS13049C | V8-360 (5.9L) | FEL-PRO Part # VS13049C ; Cork {Valve Cover Gasket Set}  | |
| HS8554PT | V8-360 (5.9L) | FEL-PRO Part # HS8554PT ; Exh. pipe packing & exh. manifold heat shields not incl. {Head Gasket Set HEAD (HS) SETS are used for upper engine repair  | |
| 8554PT | V8-360 (5.9L) | FEL-PRO Part # 8554PT ; 2 Req'd. {Head Gasket}  | |
| 70135 | V8-360 (5.9L) | FEL-PRO Part # 70135 ; Adapter {Oil Filter Gasket}  | |
| FS8554PT | V8-360 (5.9L) | FEL-PRO Part # FS8554PT ; Exh. pipe packing & exh. manifold heat shields not incl. {Full Gasket Set - FULL (FS) SETS are for upper and lower engine  | |
| 5095 | V8-360 (5.9L) | BCA Part # 5095 ; (Rope Type) {Nitrile Lip Material Shaft Size = 3.438 Outer Diameter = 4.012 Width = 0.41} | |
| SS13401 | V8-360 (5.9L) | FEL-PRO Part # SS13401 ; {Valve Stem Seal Set}  | |
| VS13049R | V8-360 (5.9L) | FEL-PRO Part # VS13049R ; Rubber {Valve Cover Gasket Set}  | |
| FS8554PT | V8-390 (6.4L) | FEL-PRO Part # FS8554PT ; Exh. pipe packing & exh. manifold heat shields not incl. {Full Gasket Set - FULL (FS) SETS are for upper and lower engine | |
| BS30138 | V8-390 (6.4L) | FEL-PRO Part # BS30138 ; Rubber; Two-piece {Rear Main Seal Set} | |
| 5095 | V8-390 (6.4L) | BCA Part # 5095 ; (Rope Type) {Nitrile Lip Material Shaft Size = 3.438 Outer Diameter = 4.012 Width = 0.41} | |
| TCS13075-1 | V8-390 (6.4L) | FEL-PRO Part # TCS130751 ; w/o Sleeve 'N' Seal« {Timing Cover Gasket Set} | |
| 5112S | V8-390 (6.4L) | BCA Part # 5112S ; {Oil Seal Nitrile Shaft Size=1.75 Housing Bore=2.437 Outer Diameter=2.442 Width=3.13}  | |
| 8554SP | V8-390 (6.4L) | FEL-PRO Part # 8554SP ; HeadSaver«; 2 Req'd. {Head Gasket Spacer Shim} | |
| TCS45167 | V8-390 (6.4L) | FEL-PRO Part # TCS45167 ; w/Sleeve 'N' Seal« {Gasket Set w/Seal & Sleeve} | |
| HS8554PT | V8-390 (6.4L) | FEL-PRO Part # HS8554PT ; Exh. pipe packing & exh. manifold heat shields not incl. {Head Gasket Set HEAD (HS) SETS are used for upper engine repair | |
| MS90145 | V8-390 (6.4L) | FEL-PRO Part # MS90145 ; {Int. Manifold Gasket Set} | |
| MS9812 | V8-390 (6.4L) | FEL-PRO Part # MS9812 ; Gskt. for use w/old heat shield {Exh. Manifold Gasket Set} | |
| MS95000 | V8-390 (6.4L) | FEL-PRO Part # MS95000 ; Heat shield {Exh. Manifold Gasket Set} | |
| 8554PT | V8-390 (6.4L) | FEL-PRO Part # 8554PT ; 2 Req'd. {Head Gasket} | |
| 70135 | V8-390 (6.4L) | FEL-PRO Part # 70135 ; Adapter {Oil Filter Gasket} | |
| 2942 | V8-390 (6.4L) | BCA Part # 2942 ; {Oil Seal Acrylates Shaft Size=1.875 Housing Bore=2.56 Outer Diameter=2.565 Width=0.406} | |
| VS13049C | V8-390 (6.4L) | FEL-PRO Part # VS13049C ; Cork {Valve Cover Gasket Set} | |
| VS13049R | V8-390 (6.4L) | FEL-PRO Part # VS13049R ; Rubber {Valve Cover Gasket Set} | |
| 88187 | V8-390 (6.4L) | BCA Part # 88187 ; {Harmonic Balancer Sleeve (1.872x1.878x.563)} | |
| SS13401 | V8-390 (6.4L) | FEL-PRO Part # SS13401 ; {Valve Stem Seal Set} | |
| 5001 | V8-390 (6.4L) | BCA Part # 5001 ; {Harmonic Balancer Kit} | |
| 99187 | V8-390 (6.4L) | BCA Part # 99187 ; Redi-Sleeve {Redi-Sleeve (1.872x1.878x.563)} | |
| 5001 | V8-390 (6.4L) | BCA Part # 5001 ; {Harmonic Balancer Kit} | |
| 88187 | V8-390 (6.4L) | BCA Part # 88187 ; {Harmonic Balancer Sleeve (1.872x1.878x.563)} | |
| MS95000 | V8-390 (6.4L) | FEL-PRO Part # MS95000 ; Heat shield {Exh. Manifold Gasket Set} | |
| 5112S | V8-390 (6.4L) | BCA Part # 5112S ; {Oil Seal Nitrile Shaft Size=1.75 Housing Bore=2.437 Outer Diameter=2.442 Width=3.13} | |
| 8554SP | V8-390 (6.4L) | FEL-PRO Part # 8554SP ; HeadSaver«; 2 Req'd. {Head Gasket Spacer Shim} | |
| 99187 | V8-390 (6.4L) | BCA Part # 99187 ; Redi-Sleeve {Redi-Sleeve (1.872x1.878x.563)} | |
| SS13401 | V8-390 (6.4L) | FEL-PRO Part # SS13401 ; {Valve Stem Seal Set} | |
| TCS45167 | V8-390 (6.4L) | FEL-PRO Part # TCS45167 ; w/Sleeve 'N' Seal« {Gasket Set w/Seal & Sleeve} | |
| 8554PT | V8-390 (6.4L) | FEL-PRO Part # 8554PT ; 2 Req'd. {Head Gasket} | |
| 5095 | V8-390 (6.4L) | BCA Part # 5095 ; (Rope Type) {Nitrile Lip Material Shaft Size = 3.438 Outer Diameter = 4.012 Width = 0.41} | |
| BS30138 | V8-390 (6.4L) | FEL-PRO Part # BS30138 ; Rubber; Two-piece {Rear Main Seal Set} | |
| MS9812 | V8-390 (6.4L) | FEL-PRO Part # MS9812 ; Gskt. for use w/old heat shield {Exh. Manifold Gasket Set} | |
| VS13049C | V8-390 (6.4L) | FEL-PRO Part # VS13049C ; Cork {Valve Cover Gasket Set} | |
| MS90145 | V8-390 (6.4L) | FEL-PRO Part # MS90145 ; {Int. Manifold Gasket Set} | |
| TCS13075-1 | V8-390 (6.4L) | FEL-PRO Part # TCS130751 ; w/o Sleeve 'N' Seal« {Timing Cover Gasket Set} | |
| 70135 | V8-390 (6.4L) | FEL-PRO Part # 70135 ; Adapter {Oil Filter Gasket} | |
| VS13049R | V8-390 (6.4L) | FEL-PRO Part # VS13049R ; Rubber {Valve Cover Gasket Set} | |
| HS8554PT | V8-390 (6.4L) | FEL-PRO Part # HS8554PT ; Exh. pipe packing & exh. manifold heat shields not incl. {Head Gasket Set HEAD (HS) SETS are used for upper engine repair | |
| 2942 | V8-390 (6.4L) | BCA Part # 2942 ; {Oil Seal Acrylates Shaft Size=1.875 Housing Bore=2.56 Outer Diameter=2.565 Width=0.406} | |
| FS8554PT | V8-390 (6.4L) | FEL-PRO Part # FS8554PT ; Exh. pipe packing & exh. manifold heat shields not incl. {Full Gasket Set - FULL (FS) SETS are for upper and lower engine | |
| 520SD | V8-460 (7.5L) | FEL-PRO Part # 520SD ; PermaTorque Severe DutyÖ; 2 Req'd. {Cylinder Head Gasket}  | |
| FS8265PT-3 | V8-460 (7.5L) | FEL-PRO Part # FS8265PT3 ; Int. manifold gskt. not incl.; Exh. pipe packing & exh. manifold heat shields not incl.; Water pump to plate gskt. not in  | |
| 99187 | V8-460 (7.5L) | BCA Part # 99187 ; Redi-Sleeve {Redi-Sleeve (1.872x1.878x.563)} | |
| VS50044R | V8-460 (7.5L) | FEL-PRO Part # VS50044R ; Rubber {Valve Cover Gasket Set}  | |
| MS96018 | V8-460 (7.5L) | FEL-PRO Part # MS96018 ; Exc. LPG eng. {Valley Pan Gasket Set}  | |
| MS96044 | V8-460 (7.5L) | FEL-PRO Part # MS96044 ; LPG eng. {Valley Pan Gasket Set}  | |
| 5095 | V8-460 (7.5L) | BCA Part # 5095 ; (Rope Type) {Nitrile Lip Material Shaft Size = 3.438 Outer Diameter = 4.012 Width = 0.41} | |
| VS50044C | V8-460 (7.5L) | FEL-PRO Part # VS50044C ; Cork {Valve Cover Gasket Set}  | |
| 8265PT-1 | V8-460 (7.5L) | FEL-PRO Part # 8265PT1 ; 2 Req'd. {Head Gasket}  | |
| 5118 | V8-460 (7.5L) | BCA Part # 5118 ; (Split Seal) {Nitrile Lip Material}  | |
| 2942 | V8-460 (7.5L) | BCA Part # 2942 ; {Oil Seal Acrylates Shaft Size=1.875 Housing Bore=2.56 Outer Diameter=2.565 Width=0.406} | |
| BS40654 | V8-460 (7.5L) | FEL-PRO Part # BS40654 ; Viton«; Two-piece {Rear Main Seal Set}  | |
| BS40032 | V8-460 (7.5L) | FEL-PRO Part # BS40032 ; Rubber; Two-piece {Rear Main Seal Set}  | |
| SS13364 | V8-460 (7.5L) | FEL-PRO Part # SS13364 ; Loc. Int. & Exh.; Premium valve stem seals incl. {Valve Stem Seal Set}  | |
| MS90291 | V8-460 (7.5L) | FEL-PRO Part # MS90291 ; Oval ports; Gskt. for use w/old heat shield {Exh. Manifold Gasket Set}  | |
| MS90248 | V8-460 (7.5L) | FEL-PRO Part # MS90248 ; Oval ports; Heat shield {Exh. Manifold Gasket Set}  | |
| 5001 | V8-460 (7.5L) | BCA Part # 5001 ; {Harmonic Balancer Kit} | |
| TCS45024 | V8-460 (7.5L) | FEL-PRO Part # TCS45024 ; w/o Sleeve 'N' Seal«; w/Original type cover using internally installed seal; Water pump to plate gskt. not incl. {Timing C  | |
| TCS45129 | V8-460 (7.5L) | FEL-PRO Part # TCS45129 ; w/o Sleeve 'N' Seal«; w/Service type cover using flanged, externally installed seal; Water pump to plate gskt. not incl. {  | |
| TCS45279 | V8-460 (7.5L) | FEL-PRO Part # TCS45279 ; w/Sleeve 'N' Seal«; w/Original type cover using internally installed seal; Water pump to plate gskt. not incl. {Gasket Set  | |
| HS8265PT-1 | V8-460 (7.5L) | FEL-PRO Part # HS8265PT1 ; Int. manifold gskt. not incl.; Exh. pipe packing & exh. manifold heat shields not incl.; Premium valve stem seals incl. {  | |
| 88187 | V8-460 (7.5L) | BCA Part # 88187 ; {Harmonic Balancer Sleeve (1.872x1.878x.563)} | |
| VS50033C-1 | L6-240 (3.9L) | FEL-PRO Part # VS50033C1 ; Cork {Valve Cover Gasket Set} | |
| BS40509 | L6-240 (3.9L) | FEL-PRO Part # BS40509 ; Rubber; One-piece {Rear Main Seal Set} | |
| CS8168 | L6-240 (3.9L) | FEL-PRO Part # CS8168 ; {Conversion Gasket Set - Gasket set for the lower half of the engine block. Typically includes oil pan gasket, front and rea | |
| 8168PT | L6-240 (3.9L) | FEL-PRO Part # 8168PT ; {Head Gasket} | |
| TCS45278 | L6-240 (3.9L) | FEL-PRO Part # TCS45278 ; w/Sleeve 'N' Seal« {Gasket Set w/Seal & Sleeve} | |
| SS13807 | L6-240 (3.9L) | FEL-PRO Part # SS13807 ; Premium valve stem seals incl. {Valve Stem Seal Set} | |
| 8168SP | L6-240 (3.9L) | FEL-PRO Part # 8168SP ; HeadSaver« {Head Gasket Spacer Shim} | |
| FS8168PT-2 | L6-240 (3.9L) | FEL-PRO Part # FS8168PT2 ; Premium valve stem seals incl. {Full Gasket Set - FULL (FS) SETS are for upper and lower engine work combined, usually a | |
| VS50033R | L6-240 (3.9L) | FEL-PRO Part # VS50033R ; Rubber {Valve Cover Gasket Set} | |
| BS40645 | L6-240 (3.9L) | FEL-PRO Part # BS40645 ; PTFE Rubber; One-piece {Rear Main Seal Set} | |
| HS8168PT-3 | L6-240 (3.9L) | FEL-PRO Part # HS8168PT3 ; Premium valve stem seals incl. {Head Gasket Set HEAD (HS) SETS are used for upper engine repair only, typically on a valv | |
| 525SD | L6-240 (3.9L) | FEL-PRO Part # 525SD ; PermaTorque Severe DutyÖ {Cylinder Head Gasket} | |
| TCS45044 | L6-240 (3.9L) | FEL-PRO Part # TCS45044 ; w/o Sleeve 'N' Seal« {Timing Cover Gasket Set} | |
