Gaskets and Seals:All parts for 1982 FORDE-250 ECONOLINE
|
| Part # | Engine / Misc Description | Part Description | Click to Check Price |
| FS8548PT-16 | V8-302 (5.0L) | FEL-PRO Part # FS8548PT16 ; Water pump to plate gskts. not incl.; Premium valve stem seals incl. {Full Gasket Set - FULL (FS) SETS are for upper and  | |
| 5095 | V8-302 (5.0L) | BCA Part # 5095 ; (Rope Type) {Nitrile Lip Material Shaft Size = 3.438 Outer Diameter = 4.012 Width = 0.41}  | |
| BS30136 | V8-302 (5.0L) | FEL-PRO Part # BS30136 ; Rubber; Two-piece {Rear Main Seal Set}  | |
| 2692 | V8-302 (5.0L) | BCA Part # 2692 ; {Oil Seal Acrylates Shaft Size=1.875 Housing Bore=2.561 Outer Diameter=2.565 Width=0.528}  | |
| 5001 | V8-302 (5.0L) | BCA Part # 5001 ; {Harmonic Balancer Kit}  | |
| 88187 | V8-302 (5.0L) | BCA Part # 88187 ; {Harmonic Balancer Sleeve (1.872x1.878x.563)}  | |
| SS72562 | V8-302 (5.0L) | FEL-PRO Part # SS72562 ; Loc. Exh.; Premium valve stem seals incl. {Valve Stem Seal Set}  | |
| 5108 | V8-302 (5.0L) | BCA Part # 5108 ; (Split Seal) {Nitrile Lip Material Outer Diameter = 4.2 Width = 0.222}  | |
| SS13364-1 | V8-302 (5.0L) | FEL-PRO Part # SS133641 ; Loc. Int.; Premium valve stem seals incl. {Valve Stem Seal Set}  | |
| CS8548-4 | V8-302 (5.0L) | FEL-PRO Part # CS85484 ; Water pump to plate gskts. not incl. {Conversion Gasket Set - Gasket set for the lower half of the engine block. Typically  | |
| VS13264C | V8-302 (5.0L) | FEL-PRO Part # VS13264C ; Cork {Valve Cover Gasket Set}  | |
| VS13264R | V8-302 (5.0L) | FEL-PRO Part # VS13264R ; Rubber {Valve Cover Gasket Set}  | |
| VS13264T | V8-302 (5.0L) | FEL-PRO Part # VS13264T ; PermaDryPlus« {Valve Cover Gasket Set}  | |
| VS50029C | V8-302 (5.0L) | FEL-PRO Part # VS50029C ; Hi-Temp.; w/Compression stops {Valve Cover Gasket Set}  | |
| 99187 | V8-302 (5.0L) | BCA Part # 99187 ; Redi-Sleeve {Redi-Sleeve (1.872x1.878x.563)}  | |
| 8548SP-1 | V8-302 (5.0L) | FEL-PRO Part # 8548SP1 ; HeadSaver«; 2 Req'd. {Head Gasket Spacer Shim}  | |
| TCS45450 | V8-302 (5.0L) | FEL-PRO Part # TCS45450 ; w/Sleeve 'N' Seal«; Water pump to plate gskts. not incl. {Gasket Set w/Seal & Sleeve}  | |
| 8548PT-2 | V8-302 (5.0L) | FEL-PRO Part # 8548PT2 ; 2 Req'd.; Head bolts not incl. {Head Gasket}  | |
| MS90361 | V8-302 (5.0L) | FEL-PRO Part # MS90361 ; {Int. Manifold Gasket Set}  | |
| 9333PT-1 | V8-302 (5.0L) | FEL-PRO Part # 9333PT1 ; H/D eng.; 2 Req'd.; Head bolts not incl. {Head Gasket}  | |
| MS90000 | V8-302 (5.0L) | FEL-PRO Part # MS90000 ; {Exh. Manifold Gasket Set}  | |
| TCS45449 | V8-302 (5.0L) | FEL-PRO Part # TCS45449 ; w/o Sleeve 'N' Seal«; Water pump to plate gskts. not incl. {Timing Cover Gasket Set}  | |
| HS8548PT-11 | V8-302 (5.0L) | FEL-PRO Part # HS8548PT11 ; Premium valve stem seals incl. {Head Gasket Set HEAD (HS) SETS are used for upper engine repair only, typically on a val  | |
| VS13264T | V8-351 (5.8L) | FEL-PRO Part # VS13264T ; Windsor engine; PermaDryPlus« {Valve Cover Gasket Set} | |
| VS13264R | V8-351 (5.8L) | FEL-PRO Part # VS13264R ; Windsor engine; Rubber {Valve Cover Gasket Set} | |
| VS13264C | V8-351 (5.8L) | FEL-PRO Part # VS13264C ; Windsor engine; Cork {Valve Cover Gasket Set} | |
| 8548PT-2 | V8-351 (5.8L) | FEL-PRO Part # 8548PT2 ; Windsor engine; 2 Req'd. {Head Gasket} | |
| 9333PT-1 | V8-351 (5.8L) | FEL-PRO Part # 9333PT1 ; Windsor engine; H/D eng.; 2 Req'd. {Head Gasket} | |
| CS8548-5 | V8-351 (5.8L) | FEL-PRO Part # CS85485 ; Windsor engine; Water pump to plate gskts. not incl. {Conversion Gasket Set - Gasket set for the lower half of the engine b  | |
| 88187 | V8-351 (5.8L) | BCA Part # 88187 ; {Harmonic Balancer Sleeve (1.872x1.878x.563)} | |
| BS40042 | V8-351 (5.8L) | FEL-PRO Part # BS40042 ; Windsor engine; Rubber; Two-piece {Rear Main Seal Set}  | |
| 5117 | V8-351 (5.8L) | BCA Part # 5117 ; (Split Seal) {Nitrile Lip Material Shaft Size = 3.438 Outer Diameter = 4.313 Width = 0.188}  | |
| 8548SP-1 | V8-351 (5.8L) | FEL-PRO Part # 8548SP1 ; Windsor engine; HeadSaver«; 2 Req'd. {Head Gasket Spacer Shim} | |
| 2692 | V8-351 (5.8L) | BCA Part # 2692 ; {Oil Seal Acrylates Shaft Size=1.875 Housing Bore=2.561 Outer Diameter=2.565 Width=0.528} | |
| MS90000 | V8-351 (5.8L) | FEL-PRO Part # MS90000 ; Windsor Engine {Exh. Manifold Gasket Set} | |
| MS90361 | V8-351 (5.8L) | FEL-PRO Part # MS90361 ; Windsor Engine {Int. Manifold Gasket Set} | |
| 99187 | V8-351 (5.8L) | BCA Part # 99187 ; Redi-Sleeve {Redi-Sleeve (1.872x1.878x.563)} | |
| 5095 | V8-351 (5.8L) | BCA Part # 5095 ; (Rope Type) {Nitrile Lip Material Shaft Size = 3.438 Outer Diameter = 4.012 Width = 0.41} | |
| VS50029C | V8-351 (5.8L) | FEL-PRO Part # VS50029C ; Windsor engine; Hi-Temp.; w/Compression stops {Valve Cover Gasket Set} | |
| HS8548PT-6 | V8-351 (5.8L) | FEL-PRO Part # HS8548PT6 ; Windsor engine; Premium valve stem seals incl. {Head Gasket Set HEAD (HS) SETS are used for upper engine repair only, typ  | |
| TCS45449 | V8-351 (5.8L) | FEL-PRO Part # TCS45449 ; Windsor engine; w/o Sleeve 'N' Seal«; Water pump to plate gskts. not incl. {Timing Cover Gasket Set} | |
| FS8548PT-15 | V8-351 (5.8L) | FEL-PRO Part # FS8548PT15 ; Windsor engine; Water pump to plate gskt. not incl.; Premium valve stem seals incl. {Full Gasket Set - FULL (FS) SETS ar  | |
| 5001 | V8-351 (5.8L) | BCA Part # 5001 ; {Harmonic Balancer Kit} | |
| TCS45450 | V8-351 (5.8L) | FEL-PRO Part # TCS45450 ; Windsor engine; w/Sleeve 'N' Seal«; Water pump to plate gskts. not incl. {Gasket Set w/Seal & Sleeve} | |
| SS13807-1 | V8-351 (5.8L) | FEL-PRO Part # SS138071 ; Windsor engine; Loc. Int. & Exh.; Premium valve stem seals incl. {Valve Stem Seal Set}  | |
| 5117 | CLUB WAGON V8-351 (5.8L) | BCA Part # 5117 ; (Split Seal) {Nitrile Lip Material Shaft Size = 3.438 Outer Diameter = 4.313 Width = 0.188} | |
| 99187 | CLUB WAGON V8-351 (5.8L) | BCA Part # 99187 ; Redi-Sleeve {Redi-Sleeve (1.872x1.878x.563)} | |
| 88187 | CLUB WAGON V8-351 (5.8L) | BCA Part # 88187 ; {Harmonic Balancer Sleeve (1.872x1.878x.563)} | |
| 5001 | CLUB WAGON V8-351 (5.8L) | BCA Part # 5001 ; {Harmonic Balancer Kit} | |
| 2692 | CLUB WAGON V8-351 (5.8L) | BCA Part # 2692 ; {Oil Seal Acrylates Shaft Size=1.875 Housing Bore=2.561 Outer Diameter=2.565 Width=0.528} | |
| SS13807-1 | CLUB WAGON V8-351 (5.8L) | FEL-PRO Part # SS138071 ; Windsor engine; Loc. Int. & Exh.; Premium valve stem seals incl. {Valve Stem Seal Set} | |
| 8548PT-2 | CLUB WAGON V8-351 (5.8L) | FEL-PRO Part # 8548PT2 ; Windsor engine; 2 Req'd. {Head Gasket} | |
| 5095 | CLUB WAGON V8-351 (5.8L) | BCA Part # 5095 ; (Rope Type) {Nitrile Lip Material Shaft Size = 3.438 Outer Diameter = 4.012 Width = 0.41} | |
| BS40042 | CLUB WAGON V8-351 (5.8L) | FEL-PRO Part # BS40042 ; Windsor engine; Rubber; Two-piece {Rear Main Seal Set} | |
| TCS45449 | CLUB WAGON V8-351 (5.8L) | FEL-PRO Part # TCS45449 ; Windsor engine; w/o Sleeve 'N' Seal«; Water pump to plate gskts. not incl. {Timing Cover Gasket Set} | |
| MS90361 | CLUB WAGON V8-351 (5.8L) | FEL-PRO Part # MS90361 ; Windsor Engine {Int. Manifold Gasket Set} | |
| TCS45450 | CLUB WAGON V8-351 (5.8L) | FEL-PRO Part # TCS45450 ; Windsor engine; w/Sleeve 'N' Seal«; Water pump to plate gskts. not incl. {Gasket Set w/Seal & Sleeve} | |
| MS90000 | CLUB WAGON V8-351 (5.8L) | FEL-PRO Part # MS90000 ; Windsor Engine {Exh. Manifold Gasket Set} | |
| 8548SP-1 | CLUB WAGON V8-351 (5.8L) | FEL-PRO Part # 8548SP1 ; Windsor engine; HeadSaver«; 2 Req'd. {Head Gasket Spacer Shim} | |
| HS8548PT-6 | CLUB WAGON V8-351 (5.8L) | FEL-PRO Part # HS8548PT6 ; Windsor engine; Premium valve stem seals incl. {Head Gasket Set HEAD (HS) SETS are used for upper engine repair only, typ | |
| 9333PT-1 | CLUB WAGON V8-351 (5.8L) | FEL-PRO Part # 9333PT1 ; Windsor engine; H/D eng.; 2 Req'd. {Head Gasket} | |
| VS13264T | CLUB WAGON V8-351 (5.8L) | FEL-PRO Part # VS13264T ; Windsor engine; PermaDryPlus« {Valve Cover Gasket Set} | |
| CS8548-5 | CLUB WAGON V8-351 (5.8L) | FEL-PRO Part # CS85485 ; Windsor engine; Water pump to plate gskts. not incl. {Conversion Gasket Set - Gasket set for the lower half of the engine b | |
| FS8548PT-15 | CLUB WAGON V8-351 (5.8L) | FEL-PRO Part # FS8548PT15 ; Windsor engine; Water pump to plate gskt. not incl.; Premium valve stem seals incl. {Full Gasket Set - FULL (FS) SETS ar | |
| VS50029C | CLUB WAGON V8-351 (5.8L) | FEL-PRO Part # VS50029C ; Windsor engine; Hi-Temp.; w/Compression stops {Valve Cover Gasket Set} | |
| VS13264R | CLUB WAGON V8-351 (5.8L) | FEL-PRO Part # VS13264R ; Windsor engine; Rubber {Valve Cover Gasket Set} | |
| VS13264C | CLUB WAGON V8-351 (5.8L) | FEL-PRO Part # VS13264C ; Windsor engine; Cork {Valve Cover Gasket Set} | |
| BS40042 | CLUB WAGON V8-400 (6.6L) | FEL-PRO Part # BS40042 ; Rubber; Two-piece {Rear Main Seal Set} | |
| 88187 | CLUB WAGON V8-400 (6.6L) | BCA Part # 88187 ; {Harmonic Balancer Sleeve (1.872x1.878x.563)} | |
| SS72562 | CLUB WAGON V8-400 (6.6L) | FEL-PRO Part # SS72562 ; Loc. Exh.; Premium valve stem seals incl. {Valve Stem Seal Set} | |
| 99187 | CLUB WAGON V8-400 (6.6L) | BCA Part # 99187 ; Redi-Sleeve {Redi-Sleeve (1.872x1.878x.563)} | |
| FS8347PT | CLUB WAGON V8-400 (6.6L) | FEL-PRO Part # FS8347PT ; Int. manifold gskt. not incl.; Premium valve stem seals incl. {Full Gasket Set - FULL (FS) SETS are for upper and lower en  | |
| SS13364-1 | CLUB WAGON V8-400 (6.6L) | FEL-PRO Part # SS133641 ; Loc. Int.; Premium valve stem seals incl. {Valve Stem Seal Set} | |
| MS96020 | CLUB WAGON V8-400 (6.6L) | FEL-PRO Part # MS96020 ; {Valley Pan Gasket Set}  | |
| 5001 | CLUB WAGON V8-400 (6.6L) | BCA Part # 5001 ; {Harmonic Balancer Kit} | |
| 8347PT-1 | CLUB WAGON V8-400 (6.6L) | FEL-PRO Part # 8347PT1 ; 2 Req'd. {Head Gasket}  | |
| TCS45061 | CLUB WAGON V8-400 (6.6L) | FEL-PRO Part # TCS45061 ; w/o Sleeve 'N' Seal« {Timing Cover Gasket Set}  | |
| HS8347PT | CLUB WAGON V8-400 (6.6L) | FEL-PRO Part # HS8347PT ; Int. manifold gskt. not incl.; Premium valve stem seals incl. {Head Gasket Set HEAD (HS) SETS are used for upper engine re  | |
| MS90526 | CLUB WAGON V8-400 (6.6L) | FEL-PRO Part # MS90526 ; {Exh. Manifold Gasket Set}  | |
| VS50068R | CLUB WAGON V8-400 (6.6L) | FEL-PRO Part # VS50068R ; Rubber {Valve Cover Gasket Set}  | |
| TCS45283 | CLUB WAGON V8-400 (6.6L) | FEL-PRO Part # TCS45283 ; w/Sleeve 'N' Seal« {Gasket Set w/Seal & Sleeve}  | |
| 8347SP | CLUB WAGON V8-400 (6.6L) | FEL-PRO Part # 8347SP ; HeadSaver«; 2 Req'd. {Head Gasket Spacer Shim}  | |
| 5095 | CLUB WAGON V8-400 (6.6L) | BCA Part # 5095 ; (Rope Type) {Nitrile Lip Material Shaft Size = 3.438 Outer Diameter = 4.012 Width = 0.41} | |
| VS50068C | CLUB WAGON V8-400 (6.6L) | FEL-PRO Part # VS50068C ; Cork {Valve Cover Gasket Set}  | |
| 2692 | CLUB WAGON V8-400 (6.6L) | BCA Part # 2692 ; {Oil Seal Acrylates Shaft Size=1.875 Housing Bore=2.561 Outer Diameter=2.565 Width=0.528} | |
| 5117 | CLUB WAGON V8-400 (6.6L) | BCA Part # 5117 ; (Split Seal) {Nitrile Lip Material Shaft Size = 3.438 Outer Diameter = 4.313 Width = 0.188} | |
| MS96044 | CLUB WAGON V8-460 (7.5L) | FEL-PRO Part # MS96044 ; LPG eng. {Valley Pan Gasket Set}  | |
| HS8265PT-1 | CLUB WAGON V8-460 (7.5L) | FEL-PRO Part # HS8265PT1 ; Int. manifold gskt. not incl.; Exh. pipe packing & exh. manifold heat shields not incl.; Premium valve stem seals incl. {  | |
| 520SD | CLUB WAGON V8-460 (7.5L) | FEL-PRO Part # 520SD ; PermaTorque Severe DutyÖ; 2 Req'd. {Cylinder Head Gasket}  | |
| BS40654 | CLUB WAGON V8-460 (7.5L) | FEL-PRO Part # BS40654 ; Viton«; Two-piece {Rear Main Seal Set}  | |
| BS40032 | CLUB WAGON V8-460 (7.5L) | FEL-PRO Part # BS40032 ; Rubber; Two-piece {Rear Main Seal Set}  | |
| TCS45279 | CLUB WAGON V8-460 (7.5L) | FEL-PRO Part # TCS45279 ; w/Sleeve 'N' Seal«; w/Original type cover using internally installed seal; Water pump to plate gskt. not incl. {Gasket Set  | |
| TCS45129 | CLUB WAGON V8-460 (7.5L) | FEL-PRO Part # TCS45129 ; w/o Sleeve 'N' Seal«; w/Service type cover using flanged, externally installed seal; Water pump to plate gskt. not incl. {  | |
| VS50044C | CLUB WAGON V8-460 (7.5L) | FEL-PRO Part # VS50044C ; Cork {Valve Cover Gasket Set}  | |
| TCS45024 | CLUB WAGON V8-460 (7.5L) | FEL-PRO Part # TCS45024 ; w/o Sleeve 'N' Seal«; w/Original type cover using internally installed seal; Water pump to plate gskt. not incl. {Timing C  | |
| MS90248 | CLUB WAGON V8-460 (7.5L) | FEL-PRO Part # MS90248 ; Oval ports; Heat shield {Exh. Manifold Gasket Set}  | |
| VS50044R | CLUB WAGON V8-460 (7.5L) | FEL-PRO Part # VS50044R ; Rubber {Valve Cover Gasket Set}  | |
| MS90291 | CLUB WAGON V8-460 (7.5L) | FEL-PRO Part # MS90291 ; Oval ports; Gskt. for use w/old heat shield {Exh. Manifold Gasket Set}  | |
| MS96018 | CLUB WAGON V8-460 (7.5L) | FEL-PRO Part # MS96018 ; Exc. LPG eng. {Valley Pan Gasket Set}  | |
| 447RR | CLUB WAGON V8-460 (7.5L) | FEL-PRO Part # 447RR ; Oil filter mounting {Oil Filter Gasket} ; **Sold in packs of 5**  | |
| 5095 | CLUB WAGON V8-460 (7.5L) | BCA Part # 5095 ; (Rope Type) {Nitrile Lip Material Shaft Size = 3.438 Outer Diameter = 4.012 Width = 0.41} | |
| 5118 | CLUB WAGON V8-460 (7.5L) | BCA Part # 5118 ; (Split Seal) {Nitrile Lip Material}  | |
| SS13364 | CLUB WAGON V8-460 (7.5L) | FEL-PRO Part # SS13364 ; Loc. Int. & Exh.; Premium valve stem seals incl. {Valve Stem Seal Set}  | |
| 5001 | CLUB WAGON V8-460 (7.5L) | BCA Part # 5001 ; {Harmonic Balancer Kit} | |
| 88187 | CLUB WAGON V8-460 (7.5L) | BCA Part # 88187 ; {Harmonic Balancer Sleeve (1.872x1.878x.563)} | |
| FS8265PT-3 | CLUB WAGON V8-460 (7.5L) | FEL-PRO Part # FS8265PT3 ; Int. manifold gskt. not incl.; Exh. pipe packing & exh. manifold heat shields not incl.; Water pump to plate gskt. not in  | |
| 2942 | CLUB WAGON V8-460 (7.5L) | BCA Part # 2942 ; {Oil Seal Acrylates Shaft Size=1.875 Housing Bore=2.56 Outer Diameter=2.565 Width=0.406}  | |
| 99187 | CLUB WAGON V8-460 (7.5L) | BCA Part # 99187 ; Redi-Sleeve {Redi-Sleeve (1.872x1.878x.563)} | |
| 8265PT-1 | CLUB WAGON V8-460 (7.5L) | FEL-PRO Part # 8265PT1 ; 2 Req'd. {Head Gasket}  | |
| 2942 | SUPER L6-300 (4.9L) | BCA Part # 2942 ; {Oil Seal Acrylates Shaft Size=1.875 Housing Bore=2.56 Outer Diameter=2.565 Width=0.406} | |
| 5001 | SUPER L6-300 (4.9L) | BCA Part # 5001 ; {Harmonic Balancer Kit} | |
| TCS45278 | SUPER L6-300 (4.9L) | FEL-PRO Part # TCS45278 ; w/Sleeve 'N' Seal« {Gasket Set w/Seal & Sleeve}  | |
| 8168SP | SUPER L6-300 (4.9L) | FEL-PRO Part # 8168SP ; HeadSaver« {Head Gasket Spacer Shim}  | |
| 99372 | SUPER L6-300 (4.9L) | BCA Part # 99372 ; Redi-Sleeve {Redi-Sleeve (3.750x3.756x.688)}  | |
| 5278 | SUPER L6-300 (4.9L) | BCA Part # 5278 ; PTFE Rubber {P.T.F.E. Lip Material Shaft Size = 3.75 Outer Diameter = 4.506 Width = 0.362}  | |
| 2377 | SUPER L6-300 (4.9L) | BCA Part # 2377 ; {Oil Seal Fluoroelastomers Shaft Size=3.75 Housing Bore=4.501 Outer Diameter=4.506 Width=0.362}  | |
| TCS45044 | SUPER L6-300 (4.9L) | FEL-PRO Part # TCS45044 ; w/o Sleeve 'N' Seal« {Timing Cover Gasket Set}  | |
| 88187 | SUPER L6-300 (4.9L) | BCA Part # 88187 ; {Harmonic Balancer Sleeve (1.872x1.878x.563)} | |
| VS50033R | SUPER L6-300 (4.9L) | FEL-PRO Part # VS50033R ; Rubber {Valve Cover Gasket Set}  | |
| SS13807 | SUPER L6-300 (4.9L) | FEL-PRO Part # SS13807 ; Loc. Int. & Exh.; Premium valve stem seals incl. {Valve Stem Seal Set}  | |
| BS40645 | SUPER L6-300 (4.9L) | FEL-PRO Part # BS40645 ; PTFE Rubber; One-piece {Rear Main Seal Set}  | |
| BS40509 | SUPER L6-300 (4.9L) | FEL-PRO Part # BS40509 ; Rubber; One-piece {Rear Main Seal Set}  | |
| HS8168PT-3 | SUPER L6-300 (4.9L) | FEL-PRO Part # HS8168PT3 ; Premium valve stem seals incl. {Head Gasket Set HEAD (HS) SETS are used for upper engine repair only, typically on a valv  | |
| 525SD | SUPER L6-300 (4.9L) | FEL-PRO Part # 525SD ; PermaTorque Severe DutyÖ {Cylinder Head Gasket}  | |
| VS50033C-1 | SUPER L6-300 (4.9L) | FEL-PRO Part # VS50033C1 ; Cork {Valve Cover Gasket Set}  | |
| 8168PT | SUPER L6-300 (4.9L) | FEL-PRO Part # 8168PT ; {Head Gasket}  | |
| FS8168PT-2 | SUPER L6-300 (4.9L) | FEL-PRO Part # FS8168PT2 ; Premium valve stem seals incl. {Full Gasket Set - FULL (FS) SETS are for upper and lower engine work combined, usually a  | |
| CS8168 | SUPER L6-300 (4.9L) | FEL-PRO Part # CS8168 ; {Conversion Gasket Set - Gasket set for the lower half of the engine block. Typically includes oil pan gasket, front and rea  | |
| TCS45449 | SUPER V8-302 (5.0L) | FEL-PRO Part # TCS45449 ; w/o Sleeve 'N' Seal«; Water pump to plate gskts. not incl. {Timing Cover Gasket Set} | |
| TCS45450 | SUPER V8-302 (5.0L) | FEL-PRO Part # TCS45450 ; w/Sleeve 'N' Seal«; Water pump to plate gskts. not incl. {Gasket Set w/Seal & Sleeve} | |
| 9333PT-1 | SUPER V8-302 (5.0L) | FEL-PRO Part # 9333PT1 ; H/D eng.; 2 Req'd.; Head bolts not incl. {Head Gasket} | |
| FS8548PT-16 | SUPER V8-302 (5.0L) | FEL-PRO Part # FS8548PT16 ; Water pump to plate gskts. not incl.; Premium valve stem seals incl. {Full Gasket Set - FULL (FS) SETS are for upper and | |
| CS8548-4 | SUPER V8-302 (5.0L) | FEL-PRO Part # CS85484 ; Water pump to plate gskts. not incl. {Conversion Gasket Set - Gasket set for the lower half of the engine block. Typically | |
| 8548PT-2 | SUPER V8-302 (5.0L) | FEL-PRO Part # 8548PT2 ; 2 Req'd.; Head bolts not incl. {Head Gasket} | |
| 5095 | SUPER V8-302 (5.0L) | BCA Part # 5095 ; (Rope Type) {Nitrile Lip Material Shaft Size = 3.438 Outer Diameter = 4.012 Width = 0.41} | |
| 5108 | SUPER V8-302 (5.0L) | BCA Part # 5108 ; (Split Seal) {Nitrile Lip Material Outer Diameter = 4.2 Width = 0.222} | |
| SS13364-1 | SUPER V8-302 (5.0L) | FEL-PRO Part # SS133641 ; Loc. Int.; Premium valve stem seals incl. {Valve Stem Seal Set} | |
| 99187 | SUPER V8-302 (5.0L) | BCA Part # 99187 ; Redi-Sleeve {Redi-Sleeve (1.872x1.878x.563)} | |
| HS8548PT-11 | SUPER V8-302 (5.0L) | FEL-PRO Part # HS8548PT11 ; Premium valve stem seals incl. {Head Gasket Set HEAD (HS) SETS are used for upper engine repair only, typically on a val | |
| 88187 | SUPER V8-302 (5.0L) | BCA Part # 88187 ; {Harmonic Balancer Sleeve (1.872x1.878x.563)} | |
| 5001 | SUPER V8-302 (5.0L) | BCA Part # 5001 ; {Harmonic Balancer Kit} | |
| 2692 | SUPER V8-302 (5.0L) | BCA Part # 2692 ; {Oil Seal Acrylates Shaft Size=1.875 Housing Bore=2.561 Outer Diameter=2.565 Width=0.528} | |
| MS90361 | SUPER V8-302 (5.0L) | FEL-PRO Part # MS90361 ; {Int. Manifold Gasket Set} | |
| SS72562 | SUPER V8-302 (5.0L) | FEL-PRO Part # SS72562 ; Loc. Exh.; Premium valve stem seals incl. {Valve Stem Seal Set} | |
| BS30136 | SUPER V8-302 (5.0L) | FEL-PRO Part # BS30136 ; Rubber; Two-piece {Rear Main Seal Set} | |
| VS50029C | SUPER V8-302 (5.0L) | FEL-PRO Part # VS50029C ; Hi-Temp.; w/Compression stops {Valve Cover Gasket Set} | |
| VS13264T | SUPER V8-302 (5.0L) | FEL-PRO Part # VS13264T ; PermaDryPlus« {Valve Cover Gasket Set} | |
| VS13264R | SUPER V8-302 (5.0L) | FEL-PRO Part # VS13264R ; Rubber {Valve Cover Gasket Set} | |
| 8548SP-1 | SUPER V8-302 (5.0L) | FEL-PRO Part # 8548SP1 ; HeadSaver«; 2 Req'd. {Head Gasket Spacer Shim} | |
| VS13264C | SUPER V8-302 (5.0L) | FEL-PRO Part # VS13264C ; Cork {Valve Cover Gasket Set} | |
| MS90000 | SUPER V8-302 (5.0L) | FEL-PRO Part # MS90000 ; {Exh. Manifold Gasket Set} | |
| MS90000 | SUPER V8-351 (5.8L) | FEL-PRO Part # MS90000 ; Windsor Engine {Exh. Manifold Gasket Set} | |
