Gaskets and Seals:All parts for 1984 FORDBRONCO
|
| Part # | Engine / Misc Description | Part Description | Click to Check Price |
| 5001 | L6-300 (4.9L) | BCA Part # 5001 ; {Harmonic Balancer Kit}  | |
| VS50033C-1 | L6-300 (4.9L) | FEL-PRO Part # VS50033C1 ; Cork {Valve Cover Gasket Set}  | |
| 2942 | L6-300 (4.9L) | BCA Part # 2942 ; {Oil Seal Acrylates Shaft Size=1.875 Housing Bore=2.56 Outer Diameter=2.565 Width=0.406}  | |
| 8168PT | L6-300 (4.9L) | FEL-PRO Part # 8168PT ; {Head Gasket}  | |
| 8168SP | L6-300 (4.9L) | FEL-PRO Part # 8168SP ; HeadSaver« {Head Gasket Spacer Shim}  | |
| 525SD | L6-300 (4.9L) | FEL-PRO Part # 525SD ; PermaTorque Severe DutyÖ {Cylinder Head Gasket}  | |
| SS13807 | L6-300 (4.9L) | FEL-PRO Part # SS13807 ; Loc. Int. & Exh.; Premium valve stem seals incl. {Valve Stem Seal Set}  | |
| VS50033R | L6-300 (4.9L) | FEL-PRO Part # VS50033R ; Rubber {Valve Cover Gasket Set}  | |
| 88187 | L6-300 (4.9L) | BCA Part # 88187 ; {Harmonic Balancer Sleeve (1.872x1.878x.563)}  | |
| 99372 | L6-300 (4.9L) | BCA Part # 99372 ; Redi-Sleeve {Redi-Sleeve (3.750x3.756x.688)}  | |
| TCS45044 | L6-300 (4.9L) | FEL-PRO Part # TCS45044 ; w/o Sleeve 'N' Seal« {Timing Cover Gasket Set}  | |
| 5278 | L6-300 (4.9L) | BCA Part # 5278 ; PTFE Rubber {P.T.F.E. Lip Material Shaft Size = 3.75 Outer Diameter = 4.506 Width = 0.362}  | |
| FS8168PT-2 | L6-300 (4.9L) | FEL-PRO Part # FS8168PT2 ; Premium valve stem seals incl. {Full Gasket Set - FULL (FS) SETS are for upper and lower engine work combined, usually a  | |
| BS40509 | L6-300 (4.9L) | FEL-PRO Part # BS40509 ; Rubber; One-piece {Rear Main Seal Set}  | |
| CS8168 | L6-300 (4.9L) | FEL-PRO Part # CS8168 ; {Conversion Gasket Set - Gasket set for the lower half of the engine block. Typically includes oil pan gasket, front and rea  | |
| BS40645 | L6-300 (4.9L) | FEL-PRO Part # BS40645 ; PTFE Rubber; One-piece {Rear Main Seal Set}  | |
| TCS45278 | L6-300 (4.9L) | FEL-PRO Part # TCS45278 ; w/Sleeve 'N' Seal« {Gasket Set w/Seal & Sleeve}  | |
| HS8168PT-3 | L6-300 (4.9L) | FEL-PRO Part # HS8168PT3 ; Premium valve stem seals incl. {Head Gasket Set HEAD (HS) SETS are used for upper engine repair only, typically on a valv  | |
| 2377 | L6-300 (4.9L) | BCA Part # 2377 ; {Oil Seal Fluoroelastomers Shaft Size=3.75 Housing Bore=4.501 Outer Diameter=4.506 Width=0.362}  | |
| 8548PT-2 | V8-302 (5.0L) | FEL-PRO Part # 8548PT2 ; 2 Req'd.; Head bolts not incl. {Head Gasket}  | |
| MS90000 | V8-302 (5.0L) | FEL-PRO Part # MS90000 ; {Exh. Manifold Gasket Set}  | |
| BS40620 | V8-302 (5.0L) | FEL-PRO Part # BS40620 ; Rubber; One-piece {Rear Main Seal Set}  | |
| 2692 | V8-302 (5.0L) | BCA Part # 2692 ; {Oil Seal Acrylates Shaft Size=1.875 Housing Bore=2.561 Outer Diameter=2.565 Width=0.528}  | |
| 99187 | V8-302 (5.0L) | BCA Part # 99187 ; Redi-Sleeve {Redi-Sleeve (1.872x1.878x.563)}  | |
| 88187 | V8-302 (5.0L) | BCA Part # 88187 ; {Harmonic Balancer Sleeve (1.872x1.878x.563)} | |
| 5001 | V8-302 (5.0L) | BCA Part # 5001 ; {Harmonic Balancer Kit} | |
| VS50029C | V8-302 (5.0L) | FEL-PRO Part # VS50029C ; Hi-Temp.; w/Compression stops {Valve Cover Gasket Set}  | |
| FS8548PT-14 | V8-302 (5.0L) | FEL-PRO Part # FS8548PT14 ; Water pump to plate gskt. not incl.; Premium valve stem seals incl. {Full Gasket Set - FULL (FS) SETS are for upper and  | |
| MS90361 | V8-302 (5.0L) | FEL-PRO Part # MS90361 ; {Int. Manifold Gasket Set}  | |
| 99363 | V8-302 (5.0L) | BCA Part # 99363 ; Redi-Sleeve {Redi-Sleeve (3.623x3.629x.500)}  | |
| CS8548-2 | V8-302 (5.0L) | FEL-PRO Part # CS85482 ; Water pump to plate gskts. not incl. {Conversion Gasket Set - Gasket set for the lower half of the engine block. Typically  | |
| HS8548PT-11 | V8-302 (5.0L) | FEL-PRO Part # HS8548PT11 ; Premium valve stem seals incl. {Head Gasket Set HEAD (HS) SETS are used for upper engine repair only, typically on a val  | |
| TCS45450 | V8-302 (5.0L) | FEL-PRO Part # TCS45450 ; w/Sleeve 'N' Seal«; Water pump to plate gskts. not incl. {Gasket Set w/Seal & Sleeve}  | |
| TCS45449 | V8-302 (5.0L) | FEL-PRO Part # TCS45449 ; w/o Sleeve 'N' Seal«; Water pump to plate gskts. not incl. {Timing Cover Gasket Set}  | |
| SS72562 | V8-302 (5.0L) | FEL-PRO Part # SS72562 ; Loc. Exh.; Premium valve stem seals incl. {Valve Stem Seal Set}  | |
| SS13364-1 | V8-302 (5.0L) | FEL-PRO Part # SS133641 ; Loc. Int.; Premium valve stem seals incl. {Valve Stem Seal Set}  | |
| 5277 | V8-302 (5.0L) | BCA Part # 5277 ; PTFE Rubber {P.T.F.E. Lip Material Shaft Size = 3.625 Outer Diameter = 4.256 Width = 0.39}  | |
| VS13264C | V8-302 (5.0L) | FEL-PRO Part # VS13264C ; Cork {Valve Cover Gasket Set}  | |
| 9333PT-1 | V8-302 (5.0L) | FEL-PRO Part # 9333PT1 ; H/D eng.; 2 Req'd.; Head bolts not incl. {Head Gasket}  | |
| 8548SP-1 | V8-302 (5.0L) | FEL-PRO Part # 8548SP1 ; HeadSaver«; 2 Req'd. {Head Gasket Spacer Shim}  | |
| VS13264T | V8-302 (5.0L) | FEL-PRO Part # VS13264T ; PermaDryPlus« {Valve Cover Gasket Set}  | |
| BS40644 | V8-302 (5.0L) | FEL-PRO Part # BS40644 ; PTFE Rubber; One-piece {Rear Main Seal Set}  | |
| VS13264R | V8-302 (5.0L) | FEL-PRO Part # VS13264R ; Rubber {Valve Cover Gasket Set}  | |
| 3909 | V8-302 (5.0L) | BCA Part # 3909 ; {Oil Seal Fluoroelastomers Shaft Size=3.625 Housing Bore=4.24 Outer Diameter=4.256 Width=0.39}  | |
| 8548PT-2 | V8-351 (5.8L) | FEL-PRO Part # 8548PT2 ; Windsor engine; 2 Req'd. {Head Gasket} | |
| MS90361 | V8-351 (5.8L) | FEL-PRO Part # MS90361 ; Windsor engine; Under 8500 lbs. GVW {Int. Manifold Gasket Set} | |
| 8548SP-1 | V8-351 (5.8L) | FEL-PRO Part # 8548SP1 ; Windsor engine; HeadSaver«; 2 Req'd. {Head Gasket Spacer Shim} | |
| 99187 | V8-351 (5.8L) | BCA Part # 99187 ; Redi-Sleeve {Redi-Sleeve (1.872x1.878x.563)} | |
| HS8548PT-6 | V8-351 (5.8L) | FEL-PRO Part # HS8548PT6 ; Windsor engine; Under 8500 lbs. GVW; Premium valve stem seals incl. {Head Gasket Set HEAD (HS) SETS are used for upper en  | |
| MS90000 | V8-351 (5.8L) | FEL-PRO Part # MS90000 ; Windsor Engine {Exh. Manifold Gasket Set} | |
| HS8541PT | V8-351 (5.8L) | FEL-PRO Part # HS8541PT ; Windsor engine; Over 8500 lbs. GVW; Int. manifold gskt. not incl.; Premium valve stem seals incl. {Head Gasket Set HEAD (H  | |
| 5278 | V8-351 (5.8L) | BCA Part # 5278 ; PTFE Rubber {P.T.F.E. Lip Material Shaft Size = 3.75 Outer Diameter = 4.506 Width = 0.362} | |
| MS96025 | V8-351 (5.8L) | FEL-PRO Part # MS96025 ; Windsor engine; Over 8500 lbs. GVW {Valley Pan Gasket Set}  | |
| TCS45450 | V8-351 (5.8L) | FEL-PRO Part # TCS45450 ; Windsor engine; w/Sleeve 'N' Seal«; Water pump to plate gskts. not incl. {Gasket Set w/Seal & Sleeve} | |
| TCS45449 | V8-351 (5.8L) | FEL-PRO Part # TCS45449 ; Windsor engine; w/o Sleeve 'N' Seal«; Water pump to plate gskts. not incl. {Timing Cover Gasket Set} | |
| SS13807-1 | V8-351 (5.8L) | FEL-PRO Part # SS138071 ; Windsor engine; Loc. Int. & Exh.; Premium valve stem seals incl. {Valve Stem Seal Set}  | |
| 2377 | V8-351 (5.8L) | BCA Part # 2377 ; {Oil Seal Fluoroelastomers Shaft Size=3.75 Housing Bore=4.501 Outer Diameter=4.506 Width=0.362} | |
| VS50029C | V8-351 (5.8L) | FEL-PRO Part # VS50029C ; Windsor engine; Hi-Temp.; w/Compression stops {Valve Cover Gasket Set} | |
| VS13264T | V8-351 (5.8L) | FEL-PRO Part # VS13264T ; Windsor engine; PermaDryPlus« {Valve Cover Gasket Set} | |
| VS13264C | V8-351 (5.8L) | FEL-PRO Part # VS13264C ; Windsor engine; Cork {Valve Cover Gasket Set} | |
| BS40509 | V8-351 (5.8L) | FEL-PRO Part # BS40509 ; Windsor engine; Rubber; One-piece {Rear Main Seal Set} | |
| 99372 | V8-351 (5.8L) | BCA Part # 99372 ; Redi-Sleeve {Redi-Sleeve (3.750x3.756x.688)} | |
| 88187 | V8-351 (5.8L) | BCA Part # 88187 ; {Harmonic Balancer Sleeve (1.872x1.878x.563)} | |
| 9333PT-1 | V8-351 (5.8L) | FEL-PRO Part # 9333PT1 ; Windsor engine; H/D eng.; 2 Req'd. {Head Gasket} | |
| 5001 | V8-351 (5.8L) | BCA Part # 5001 ; {Harmonic Balancer Kit} | |
| 2692 | V8-351 (5.8L) | BCA Part # 2692 ; {Oil Seal Acrylates Shaft Size=1.875 Housing Bore=2.561 Outer Diameter=2.565 Width=0.528} | |
| BS40645 | V8-351 (5.8L) | FEL-PRO Part # BS40645 ; Windsor engine; PTFE Rubber; One-piece {Rear Main Seal Set} | |
| VS13264R | V8-351 (5.8L) | FEL-PRO Part # VS13264R ; Windsor engine; Rubber {Valve Cover Gasket Set} | |
| 5278 | V8-351 (5.8L) | BCA Part # 5278 ; PTFE Rubber {P.T.F.E. Lip Material Shaft Size = 3.75 Outer Diameter = 4.506 Width = 0.362} | |
| 2377 | V8-351 (5.8L) | BCA Part # 2377 ; {Oil Seal Fluoroelastomers Shaft Size=3.75 Housing Bore=4.501 Outer Diameter=4.506 Width=0.362} | |
| 99372 | V8-351 (5.8L) | BCA Part # 99372 ; Redi-Sleeve {Redi-Sleeve (3.750x3.756x.688)} | |
| 5001 | V8-351 (5.8L) | BCA Part # 5001 ; {Harmonic Balancer Kit} | |
| MS96025 | V8-351 (5.8L) | FEL-PRO Part # MS96025 ; Windsor engine; Over 8500 lbs. GVW {Valley Pan Gasket Set} | |
| TCS45450 | V8-351 (5.8L) | FEL-PRO Part # TCS45450 ; Windsor engine; w/Sleeve 'N' Seal«; Water pump to plate gskts. not incl. {Gasket Set w/Seal & Sleeve} | |
| TCS45449 | V8-351 (5.8L) | FEL-PRO Part # TCS45449 ; Windsor engine; w/o Sleeve 'N' Seal«; Water pump to plate gskts. not incl. {Timing Cover Gasket Set} | |
| SS13807-1 | V8-351 (5.8L) | FEL-PRO Part # SS138071 ; Windsor engine; Loc. Int. & Exh.; Premium valve stem seals incl. {Valve Stem Seal Set} | |
| VS50029C | V8-351 (5.8L) | FEL-PRO Part # VS50029C ; Windsor engine; Hi-Temp.; w/Compression stops {Valve Cover Gasket Set} | |
| VS13264T | V8-351 (5.8L) | FEL-PRO Part # VS13264T ; Windsor engine; PermaDryPlus« {Valve Cover Gasket Set} | |
| VS13264R | V8-351 (5.8L) | FEL-PRO Part # VS13264R ; Windsor engine; Rubber {Valve Cover Gasket Set} | |
| VS13264C | V8-351 (5.8L) | FEL-PRO Part # VS13264C ; Windsor engine; Cork {Valve Cover Gasket Set} | |
| BS40509 | V8-351 (5.8L) | FEL-PRO Part # BS40509 ; Windsor engine; Rubber; One-piece {Rear Main Seal Set} | |
| 88187 | V8-351 (5.8L) | BCA Part # 88187 ; {Harmonic Balancer Sleeve (1.872x1.878x.563)} | |
| 8548PT-2 | V8-351 (5.8L) | FEL-PRO Part # 8548PT2 ; Windsor engine; 2 Req'd. {Head Gasket} | |
| 2692 | V8-351 (5.8L) | BCA Part # 2692 ; {Oil Seal Acrylates Shaft Size=1.875 Housing Bore=2.561 Outer Diameter=2.565 Width=0.528} | |
| BS40645 | V8-351 (5.8L) | FEL-PRO Part # BS40645 ; Windsor engine; PTFE Rubber; One-piece {Rear Main Seal Set} | |
| MS90361 | V8-351 (5.8L) | FEL-PRO Part # MS90361 ; Windsor engine; Under 8500 lbs. GVW {Int. Manifold Gasket Set} | |
| MS90000 | V8-351 (5.8L) | FEL-PRO Part # MS90000 ; Windsor Engine {Exh. Manifold Gasket Set} | |
| 8548SP-1 | V8-351 (5.8L) | FEL-PRO Part # 8548SP1 ; Windsor engine; HeadSaver«; 2 Req'd. {Head Gasket Spacer Shim} | |
| HS8548PT-6 | V8-351 (5.8L) | FEL-PRO Part # HS8548PT6 ; Windsor engine; Under 8500 lbs. GVW; Premium valve stem seals incl. {Head Gasket Set HEAD (HS) SETS are used for upper en | |
| HS8541PT | V8-351 (5.8L) | FEL-PRO Part # HS8541PT ; Windsor engine; Over 8500 lbs. GVW; Int. manifold gskt. not incl.; Premium valve stem seals incl. {Head Gasket Set HEAD (H | |
| 9333PT-1 | V8-351 (5.8L) | FEL-PRO Part # 9333PT1 ; Windsor engine; H/D eng.; 2 Req'd. {Head Gasket} | |
| 99187 | V8-351 (5.8L) | BCA Part # 99187 ; Redi-Sleeve {Redi-Sleeve (1.872x1.878x.563)} | |
