Automotive Tools and Instruments
by Autopart.com
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Search | Contact Us | Policies | Cart |
Part Number: 38149Pro-Thread Spark Plug Thread Repair Kit M14 - 1.25
|
CLICK HERE TO VIEW PRO THREAD FLYER
GÇó Thread Size: Metric M14 x 1.25 GÇó Includes tap, installation tool and sets of inserts GÇó 2 x 3/8" , 2 x 1/2" , 2 x 3/4" OAL inserts INSTRUCTIONS: TAP: Pilot nose taps require no pre-drilling. Lubricate the tap with o suitable lubricant. Hand start tap and then turn with 19mm or -+GÇ? socket wrench. Tap entire length of port. SELECT INSERT: Ensure selected insert is the same length as the thread on the spark plug. The knurled end of the insert should be at the top of the spark plug port. INSTALL INSERT: Wind the correct insert on to the spark plug. Coat outside threads with hi-temp silicone. Wind assembly into spark plug port until fully seated. Wind spark plug out. COMPLETE INSTALLATION: Place swage tool into insert and hit several times to expand knurl. Install spark plug to recommended torque. Do not run engine until sealant has cured (refer to manufacturers instructions). |